011406 InformaCast® Enabled Loudspeaker Amplifier (AC-Powered) [Replacement Product Below]

Part Number: 011406

MSRP: $0.00

The CyberData InformaCast Enabled Loudspeaker Amplifier is for use with Singlewire's InformaCast paging and emergency notification software.

This AC-powered paging device and loud ringer is for use in places that need loud paging. It provides an easy method for implementing an IP-based overhead paging system for your existing or new VoIP Phone system.

The InformaCast Enabled Loudspeaker Amplifier can have one or two 011471 IP66 Analog Horns attached. See more details in the Operations Guide or under the Installation tab above.

  • Compatible with Singlewire InformaCast v12.1, including support for downloading SIP credentials from InformaCast
  • Supports Singlewire InformaCast High Quality Audio
  • Capable of receiving Singlewire InformaCast, SIP and multicast messages
  • Support for InformaCast resiliency
  • Support for Cisco SRST resiliency
  •  

  • Concurrent InformaCast, SIP and multicast paging
  • Loud/Night Ringer function - second SIP extension
  • Paging prioritization
  • Support for 10 multicast groups
  • 9 user-uploadable page messages
  • Can receive pages directly from Poly phones as well as other devices that can send standard multicast
  • Sense input capable of generating events or SIP calls
  • Supports delayed pages with call buffering
  • Support for security code to prevent unwanted SIP calls
  •  

  • Support for auxiliary strobe
  • Line-in for background music
  • Line-out connector
  • DTMF controlled relay
  • Supports up to two 011471 IP66 Analog Horns or other 8 Ohm speaker
  • Network and manual volume control
  •  

  • TLS 1.2 and SRTP enhanced security for IP endpoints in a local or cloud-based environment
  • Autoprovisioning via HTTPS, HTTP, or TFTP
  • HTTPS or HTTP web based configuration. HTTPS is enabled by default
  • Configurable event generation for device health and status monitoring
  • 802.11q VLAN tagging
  • HTTP command interface
  • Ethernet I/F 10/100 Mbps
    Protocol SIP RFC 3261 Compatible
    Notification Software Singlewire InformaCast v4.0 and above
    Power Input PoE 802.3at
    Audio Output 117.9 (+/- 0.2) dBC @1M and 1kHz*
    Line In:
    Input Signal Amplitudes
    Input Impedance

    2.0 VPP Maximum
    10k Ohm
    Line Out:
    Output Signal Amplitudes
    Output Level
    Total Harmonic Distortion
    Output Impedance

    2.0 VPP Maximum
    +2dBm nominal
    0.5% maximum
    10k Ohm
    On-Board Relay 1A @ 30 VDC
    Payload Types G.711 a-law, G.711 µ-law, G.722, and G.729
    Network Security TLS/SSL 1.2 and SRTP
    Enclosure UL 94-HB flame resistant, IK 08 Impact-rated, IP66 enclosure
    Operating Range Temperature: -40 degrees C to 55 degrees C (-40 degrees F to 131 degrees F)
    Humidity: 5-95%, non-condensing
    Storage Temperature -40 degrees C to 70 degrees C (-40 degrees F to 158 degrees F)
    Storage Altitude Up to 15,000 ft. (4573 m)
    Dimensions** 10 in. [254 mm] Length
    4 in. [101.6 mm] Width
    14 in. [355.6 mm] Height
    Weight
    Boxed Weight
    4.2 lbs. [1.91 kg]
    5.2 lbs. [2.39 kg]
    Compliance CE; EMC Directive – Class A EN 55032 & EN 55024, LV Safety Directive – EN 60950-1, RoHS Compliant, FCC; Part 15 Class A, Industry Canada; ICES-3 Class A, IEEE 802.3 Compliant
    Warranty 2 Years Limited
    Part Number 011406

    *When used with the optional 011471 IP66 Analog Horn (sold separately)

    **Dimensions are measured from the perspective of the product being upright with the front of the product facing you.

    What is multicast?

    IP multicast is a technique for one-to-many communication over a local IP network. IGMP multicast is sent via UDP packets from a multicast server to a multicast receiver. This stream scales to a larger receiver population by not requiring prior knowledge of who or how many receivers there are. Multicast uses network infrastructure efficiently by requiring the source to send a packet only once, even if it needs to be delivered to many receivers. The network replicates the packet in order to reach multiple receivers only when necessary.

    Multicast is a great alternative to SIP registration as it does not require that the recipient of the stream to register as an extension on an IP-PBX server.

    CyberData products support both regular IGMP multicast as well as proprietary Polycom Group Paging.

    Questions regarding Singlewire-enabled devices?
    I am looking for an approved panic button to connect to your amplifiers that has a cover over the panic button to avoid accidental pressing and also one that may be waterproof for outside use.

    See the following webpage for a nice selection: https://www.sti-usa.com/pcategories/waterproof_buttons_and_switches/


    Typical Installation


    Speaker Connection Options

    Upload an Audio Message

    Connecting the Auxiliary RGB Strobe Kit to the Loudspeaker Amplifier

    High Power Mode One Speaker

    High Power Mode Two Speakers

    Typical Warehouse Paging Setup
    Intelligibility Outdoor Field Test

    Components 

    Replacing the Speaker Wire

    IP66 Weatherproofing

    Suggested Installation of the Horn


    Description

    The CyberData InformaCast Enabled Loudspeaker Amplifier is for use with Singlewire's InformaCast paging and emergency notification software.

    This AC-powered paging device and loud ringer is for use in places that need loud paging. It provides an easy method for implementing an IP-based overhead paging system for your existing or new VoIP Phone system.

    The InformaCast Enabled Loudspeaker Amplifier can have one or two 011471 IP66 Analog Horns attached. See more details in the Operations Guide or under the Installation tab above.

    Features

  • Compatible with Singlewire InformaCast v12.1, including support for downloading SIP credentials from InformaCast
  • Supports Singlewire InformaCast High Quality Audio
  • Capable of receiving Singlewire InformaCast, SIP and multicast messages
  • Support for InformaCast resiliency
  • Support for Cisco SRST resiliency
  •  

  • Concurrent InformaCast, SIP and multicast paging
  • Loud/Night Ringer function - second SIP extension
  • Paging prioritization
  • Support for 10 multicast groups
  • 9 user-uploadable page messages
  • Can receive pages directly from Poly phones as well as other devices that can send standard multicast
  • Sense input capable of generating events or SIP calls
  • Supports delayed pages with call buffering
  • Support for security code to prevent unwanted SIP calls
  •  

  • Support for auxiliary strobe
  • Line-in for background music
  • Line-out connector
  • DTMF controlled relay
  • Supports up to two 011471 IP66 Analog Horns or other 8 Ohm speaker
  • Network and manual volume control
  •  

  • TLS 1.2 and SRTP enhanced security for IP endpoints in a local or cloud-based environment
  • Autoprovisioning via HTTPS, HTTP, or TFTP
  • HTTPS or HTTP web based configuration. HTTPS is enabled by default
  • Configurable event generation for device health and status monitoring
  • 802.11q VLAN tagging
  • HTTP command interface
  • Specs

    Ethernet I/F 10/100 Mbps
    Protocol SIP RFC 3261 Compatible
    Notification Software Singlewire InformaCast v4.0 and above
    Power Input PoE 802.3at
    Audio Output 117.9 (+/- 0.2) dBC @1M and 1kHz*
    Line In:
    Input Signal Amplitudes
    Input Impedance

    2.0 VPP Maximum
    10k Ohm
    Line Out:
    Output Signal Amplitudes
    Output Level
    Total Harmonic Distortion
    Output Impedance

    2.0 VPP Maximum
    +2dBm nominal
    0.5% maximum
    10k Ohm
    On-Board Relay 1A @ 30 VDC
    Payload Types G.711 a-law, G.711 µ-law, G.722, and G.729
    Network Security TLS/SSL 1.2 and SRTP
    Enclosure UL 94-HB flame resistant, IK 08 Impact-rated, IP66 enclosure
    Operating Range Temperature: -40 degrees C to 55 degrees C (-40 degrees F to 131 degrees F)
    Humidity: 5-95%, non-condensing
    Storage Temperature -40 degrees C to 70 degrees C (-40 degrees F to 158 degrees F)
    Storage Altitude Up to 15,000 ft. (4573 m)
    Dimensions** 10 in. [254 mm] Length
    4 in. [101.6 mm] Width
    14 in. [355.6 mm] Height
    Weight
    Boxed Weight
    4.2 lbs. [1.91 kg]
    5.2 lbs. [2.39 kg]
    Compliance CE; EMC Directive – Class A EN 55032 & EN 55024, LV Safety Directive – EN 60950-1, RoHS Compliant, FCC; Part 15 Class A, Industry Canada; ICES-3 Class A, IEEE 802.3 Compliant
    Warranty 2 Years Limited
    Part Number 011406

    *When used with the optional 011471 IP66 Analog Horn (sold separately)

    **Dimensions are measured from the perspective of the product being upright with the front of the product facing you.

    FAQs

    What is multicast?

    IP multicast is a technique for one-to-many communication over a local IP network. IGMP multicast is sent via UDP packets from a multicast server to a multicast receiver. This stream scales to a larger receiver population by not requiring prior knowledge of who or how many receivers there are. Multicast uses network infrastructure efficiently by requiring the source to send a packet only once, even if it needs to be delivered to many receivers. The network replicates the packet in order to reach multiple receivers only when necessary.

    Multicast is a great alternative to SIP registration as it does not require that the recipient of the stream to register as an extension on an IP-PBX server.

    CyberData products support both regular IGMP multicast as well as proprietary Polycom Group Paging.

    Questions regarding Singlewire-enabled devices?
    I am looking for an approved panic button to connect to your amplifiers that has a cover over the panic button to avoid accidental pressing and also one that may be waterproof for outside use.

    See the following webpage for a nice selection: https://www.sti-usa.com/pcategories/waterproof_buttons_and_switches/

    Installation


    Typical Installation


    Speaker Connection Options

    Upload an Audio Message

    Connecting the Auxiliary RGB Strobe Kit to the Loudspeaker Amplifier

    High Power Mode One Speaker

    High Power Mode Two Speakers

    Typical Warehouse Paging Setup
    Intelligibility Outdoor Field Test

    Components 

    Replacing the Speaker Wire

    IP66 Weatherproofing

    Suggested Installation of the Horn


    Downloads