011233 SIP Paging Adapter

Part Number: 011233

MSRP: $415.00

Each CyberData device comes with a Two-Year Warranty. Extended Warranty extends your warranty for an additional two years. Already have a CyberData device and want to add a Two-Year Warranty? Please click the link below to register your device first:

http://support.cyberdata.net/register.php

CyberData’s Try & Buy program allows you to order QTY (1) of any SIP device and try it for 30 days to determine if it will meet your needs. When “Try and Buy" is selected, we charge on shipment and we will apply a credit IF the product is returned through our RMA process within 30 days, in good condition in its original packaging.

Once returned and upon inspection, CyberData will apply the credit to your credit card, less any shipping and handling charges that CyberData incurs. No returns are accepted after 30 days under our Try & Buy program.

Need help configuring your devices?

The CyberData SIP Paging Adapter is a VoIP endpoint that interfaces analog paging systems with SIP and Multicast-based audio sources.

The SPA (SIP Paging Adapter) can be configured to support two separate SIP extensions. SIP extension one passes audio through to the analog output spoken from the caller's handset. When called, SIP extension two plays a bell audio that can be used as a night ringer when configured in a night ring group.

The SPA supports up to 9 user-loadable messages that can be played by a DTMF command. The SPA supports a line-level input for playing background music.

CyberData has maintained one of the most comprehensive lists of IP PBX servers certified to work with CyberData VoIP Products.

  • Loud ringer - second SIP extension
  • Compatible with most analog amplifiers in the market
  • HTTP Command Interface
  • 10 channel prioritized Multicast ports
  • HTTP Web Interface and setup
  • Built-in diagnostics
  • Unbalanced Line-Out
  • Remote amp fault sensor
  • DTMF and programmatic controlled Relay
  • Delayed page support
  • DTMF pass-through
  • Cisco SRST
  • Rack mountable
Ethernet I/F 10/100 Mbps
Protocol SIP RFC 3261 Compatible
Power Input PoE 802.3af or 48VDC
Line In:
Input Signal Amplitudes
Input Impedance

2.0 VPP Maximum
10k Ohm
Line Out:
Output Signal Amplitudes
Output Level
Total Harmonic Distortion
Output Impedance

2.0 VPP Maximum
+2dBm nominal
0.5% maximum
10k Ohm
Page Port Output Balanced 600 Ohm 5VPP
Payload Types G.711 a-law, G.711μ-law, and G.722
Operating Range Temperature: -40 degrees C to 55 degrees C (-40 degrees F to 131 degrees F)
Humidity: 5-95%, non-condensing
Storage Temperature -40 degrees C to 70 degrees C (-40 degrees F to 158 degrees F)
Storage Altitude Up to 15,000 ft. (4573 m)
Dimensions* Length: 6.11 inches [155.19 mm]
Width: 4.05 inches [102.87 mm]
Height: 1.15 inches [29.21 mm]
Weight
Boxed Weight
1.2 lbs. [0.54 kg]
1.8 lbs. [.82 kg]
Compliance UL 62368-1, RoHS Compliant, FCC; Part 15 Class A, IEEE 802.3 Compliant; Reference Number for UL: E129569 Vol 4 Sec 1
Warranty 2 years limited
Part Number 011233

*Dimensions are measured from the perspective of the product being upright with the front of the product facing you.

What is multicast?

IP multicast is a technique for one-to-many communication over a local IP network. IGMP multicast is sent via UDP packets from a multicast server to a multicast receiver. This stream scales to a larger receiver population by not requiring prior knowledge of who or how many receivers there are. Multicast uses network infrastructure efficiently by requiring the source to send a packet only once, even if it needs to be delivered to many receivers. The network replicates the packet in order to reach multiple receivers only when necessary.

Multicast is a great alternative to SIP registration as it does not require that the recipient of the stream to register as an extension on an IP-PBX server.

CyberData products support both regular IGMP multicast as well as proprietary Polycom Group Paging.

How do I update my firmware?

Check to see if your current firmware is the latest version before attempting to update. Download the latest version firmware which includes the Update Firmware Utility. To upload the firmware from your PC, see your Operations Guide.

What IP phones do you recommend for setting up a Peer to Peer with this device?
If I wanted to power the device by using the auxiliary power connector, what type of power supply do I need?

The power connection requires a +48v 380mA (min) power brick. The connector is 2.5mm with a positive center. Cisco's CP-PWR-CUBE-3 power brick is approved.


Typical Use Case

Connections

All firmware files include release notes and an autoprovisioning template.

Please back up your configuration before uploading firmware, and restore factory defaults after the upload is complete.

Serial Number begins with 2330xxxxx

Documentation
Description Date
PDF Datasheet DATE: 1/23/19
PDF Quick Start Guide DATE: 9/11/13
PDF Quick-Reference Placemat DATE: 3/4/14
PDF Operations Guide (firmware version 7.3.0) DATE: 5/27/15
PDF Operations Guide (firmware version 7.2.1) DATE:10/8/14
PDF Operations Guide (firmware version 7.0.1) DATE: 7/8/14
PDF Operations Guide (firmware version 6.1.0) DATE:11/12/13
PDF Polycom Multicast Diagram DATE: 3/10/15
Firmware, Drivers & Utilities
ZIP Firmware 7.3.0 DATE: 3/13/15
ZIP Firmware 7.2.1 DATE: 9/3/14
ZIP Firmware 7.0.1 DATE: 11/7/13
ZIP Firmware 7.0.0 DATE: 9/11/13
ZIP Firmware 6.1.0 DATE: 4/30/13
ZIP Firmware 6.0.0 DATE: 4/12/13
ZIP The Discovery Utility scans the network for CyberData Devices.

Serial Number begins with 2331xxxxx

Documentation
Description Date
PDF Datasheet DATE: 1/23/19
PDF Quick Start Guide DATE: 2/8/18
PDF Quick-Reference Placemat DATE: 2/15/18
PDF Operations Guide (firmware version 11.6.0) DATE: 7/20/18
PDF Operations Guide (firmware version 11.5.2) DATE: 2/9/16
PDF Polycom Multicast Diagram DATE: 3/10/15
Firmware, Drivers & Utilities
ZIP Firmware 11.7.2 DATE: 8/2/17
ZIP Firmware 11.6.1 DATE: 4/18/16
ZIP Firmware 11.6.0 DATE:3/11/16
ZIP Firmware 11.5.5 DATE: 1/26/16
ZIP Firmware 11.5.2 DATE:1/19/2016
ZIP Firmware 8.0.1 DATE: 6/30/15
ZIP The Discovery Utility scans the network for CyberData devices.

Descripton

The CyberData SIP Paging Adapter is a VoIP endpoint that interfaces analog paging systems with SIP and Multicast-based audio sources.

The SPA (SIP Paging Adapter) can be configured to support two separate SIP extensions. SIP extension one passes audio through to the analog output spoken from the caller's handset. When called, SIP extension two plays a bell audio that can be used as a night ringer when configured in a night ring group.

The SPA supports up to 9 user-loadable messages that can be played by a DTMF command. The SPA supports a line-level input for playing background music.

CyberData has maintained one of the most comprehensive lists of IP PBX servers certified to work with CyberData VoIP Products.

Features

  • Loud ringer - second SIP extension
  • Compatible with most analog amplifiers in the market
  • HTTP Command Interface
  • 10 channel prioritized Multicast ports
  • HTTP Web Interface and setup
  • Built-in diagnostics
  • Unbalanced Line-Out
  • Remote amp fault sensor
  • DTMF and programmatic controlled Relay
  • Delayed page support
  • DTMF pass-through
  • Cisco SRST
  • Rack mountable

Specs

Ethernet I/F 10/100 Mbps
Protocol SIP RFC 3261 Compatible
Power Input PoE 802.3af or 48VDC
Line In:
Input Signal Amplitudes
Input Impedance

2.0 VPP Maximum
10k Ohm
Line Out:
Output Signal Amplitudes
Output Level
Total Harmonic Distortion
Output Impedance

2.0 VPP Maximum
+2dBm nominal
0.5% maximum
10k Ohm
Page Port Output Balanced 600 Ohm 5VPP
Payload Types G.711 a-law, G.711μ-law, and G.722
Operating Range Temperature: -40 degrees C to 55 degrees C (-40 degrees F to 131 degrees F)
Humidity: 5-95%, non-condensing
Storage Temperature -40 degrees C to 70 degrees C (-40 degrees F to 158 degrees F)
Storage Altitude Up to 15,000 ft. (4573 m)
Dimensions* Length: 6.11 inches [155.19 mm]
Width: 4.05 inches [102.87 mm]
Height: 1.15 inches [29.21 mm]
Weight
Boxed Weight
1.2 lbs. [0.54 kg]
1.8 lbs. [.82 kg]
Compliance UL 62368-1, RoHS Compliant, FCC; Part 15 Class A, IEEE 802.3 Compliant; Reference Number for UL: E129569 Vol 4 Sec 1
Warranty 2 years limited
Part Number 011233

*Dimensions are measured from the perspective of the product being upright with the front of the product facing you.

FAQs

What is multicast?

IP multicast is a technique for one-to-many communication over a local IP network. IGMP multicast is sent via UDP packets from a multicast server to a multicast receiver. This stream scales to a larger receiver population by not requiring prior knowledge of who or how many receivers there are. Multicast uses network infrastructure efficiently by requiring the source to send a packet only once, even if it needs to be delivered to many receivers. The network replicates the packet in order to reach multiple receivers only when necessary.

Multicast is a great alternative to SIP registration as it does not require that the recipient of the stream to register as an extension on an IP-PBX server.

CyberData products support both regular IGMP multicast as well as proprietary Polycom Group Paging.

How do I update my firmware?

Check to see if your current firmware is the latest version before attempting to update. Download the latest version firmware which includes the Update Firmware Utility. To upload the firmware from your PC, see your Operations Guide.

What IP phones do you recommend for setting up a Peer to Peer with this device?
If I wanted to power the device by using the auxiliary power connector, what type of power supply do I need?

The power connection requires a +48v 380mA (min) power brick. The connector is 2.5mm with a positive center. Cisco's CP-PWR-CUBE-3 power brick is approved.

Installation


Typical Use Case

Connections

Downloads

All firmware files include release notes and an autoprovisioning template.

Please back up your configuration before uploading firmware, and restore factory defaults after the upload is complete.

Serial Number begins with 2330xxxxx

Documentation
Description Date
PDF Datasheet DATE: 1/23/19
PDF Quick Start Guide DATE: 9/11/13
PDF Quick-Reference Placemat DATE: 3/4/14
PDF Operations Guide (firmware version 7.3.0) DATE: 5/27/15
PDF Operations Guide (firmware version 7.2.1) DATE:10/8/14
PDF Operations Guide (firmware version 7.0.1) DATE: 7/8/14
PDF Operations Guide (firmware version 6.1.0) DATE:11/12/13
PDF Polycom Multicast Diagram DATE: 3/10/15
Firmware, Drivers & Utilities
ZIP Firmware 7.3.0 DATE: 3/13/15
ZIP Firmware 7.2.1 DATE: 9/3/14
ZIP Firmware 7.0.1 DATE: 11/7/13
ZIP Firmware 7.0.0 DATE: 9/11/13
ZIP Firmware 6.1.0 DATE: 4/30/13
ZIP Firmware 6.0.0 DATE: 4/12/13
ZIP The Discovery Utility scans the network for CyberData Devices.

Serial Number begins with 2331xxxxx

Documentation
Description Date
PDF Datasheet DATE: 1/23/19
PDF Quick Start Guide DATE: 2/8/18
PDF Quick-Reference Placemat DATE: 2/15/18
PDF Operations Guide (firmware version 11.6.0) DATE: 7/20/18
PDF Operations Guide (firmware version 11.5.2) DATE: 2/9/16
PDF Polycom Multicast Diagram DATE: 3/10/15
Firmware, Drivers & Utilities
ZIP Firmware 11.7.2 DATE: 8/2/17
ZIP Firmware 11.6.1 DATE: 4/18/16
ZIP Firmware 11.6.0 DATE:3/11/16
ZIP Firmware 11.5.5 DATE: 1/26/16
ZIP Firmware 11.5.2 DATE:1/19/2016
ZIP Firmware 8.0.1 DATE: 6/30/15
ZIP The Discovery Utility scans the network for CyberData devices.