011258 2-Port PoE Gigabit Port Mirroring Switch (Replacement Product Below)

The CyberData 2-Port PoE Gigabit Port Mirroring Switch enables users of a network attached device to split a single 802.3af or 802.3at PoE powered Gigabit Ethernet port into two Gigabit Ethernet ports for diagnostics purposes while still maintaining a PoE connection to the attached device.

• Port Mirroring 2-Port auto-negotiating (no crossover cable required)
• 10.100.1000 full duplex (PoE-powered)
• Link/Status and connection speed LEDs
• VLAN Packet Forwarding
• 9216-byte jumbo packet length forwarding at wire speed RoHS compliant

Power Distribution

 

• The PD input can be up to 30W.
• A 802.3af source @ 15W
• A 802.3at source @ 25W
• A non-compliant PoE injector up to 30W
• The internal circuits on the splitter takes 2W to operate.
• With an 802.3af input, 13W are available
• to share between the two PSE outputs. With an 802.3at input, 23W are available to share between the two PSE outputs.
• With a non-compliant 30W PoE injector, 28W are available to share between the two PSE outputs.
• Either one or both of the PSE outputs can provide PoE power as long as the overall PSE output wattage is 2W less than the PD input.

Uplink In Port	PD 802.3af or 802.3at
Downlink Out Port	PSE 802.3at (limited PD input)
Dimensions*	Length: 5.31 inches [135 mm] Width: 3.03 inches [77 mm] Height: 1.06 inches [27 mm]
Warranty	2 years
Unit Weight	0.56 lbs.
Standards	IEEE
Modes	10BASE-T, 100BASE-TX, and 1000BASE-T
LEDs	Link/Status and Connection Speed
Operating temperature	0 to 70 degrees Celsius
Part Number	011258

*Dimensions are measured from the perspective of the product being upright with the front of the product facing you.

Can you recommend a good network capturing program?

Typical Installation

Documentation

Documentation
Description	Date
PDF Datasheet	DATE:10/20/16
PDF Quick-Reference Placemat	DATE:1/10/22