011116 Singlewire InformaCast Loudspeaker Amplifier-PoE

Part Number: 011116

MSRP: $0.00

Each CyberData device comes with a Two-Year Warranty. Extended Warranty extends your warranty for an additional two years. Already have a CyberData device and want to add a Two-Year Warranty? Please click the link below to register your device first:

http://support.cyberdata.net/register.php


The CyberData SIP-enabled VoIP V2 Loudspeaker Amplifier is for use with Singlewire's paging and emergency notification software InformaCast® or InformaCast® CK. This PoE-powered device hooks up easily to new and existing Singlewire installations. With up to 25 watts of driving power (802.3at), the Amplifier provides direct drive of a standard Horn speaker and supports a line out connector for connection to an external amplifier. The interface is compatible with most SIP-based IP PBX servers that comply with the SIP RFC 3261. For non-SIP environments, the Paging Amplifier can be configured to listen to Multicast address and port number combinations to form paging zones.
  • InformaCast® compliant
  • InformaCast® CK compliant
  • Supports SingleWire/Informacast Server Resilience
  • Dual speed 10/100 Mbps
  • Weather-resistant NEMA enclosure
  • Web-base firmware upgradeable
  • Power-over-ethernet enabled
  • IGMP
Protocol InformaCast® v4.0 and later
Ethernet I/F 10/100 Mbps
Power Input PoE 802.3at or 802.3af
Operating Temperature -10 degrees C to 50 degrees C (14 degrees F to 122 degrees F)
Payload Types G711
Output Level, 802.3af: Up to 8 watts
Output Level, 802.3at: Up to 25 watts
RCA Output Signal Amplitudes 2.0 VPP maximum
RCA Output Level +2dBm nominal
RCA Total Harmonic Distortion 0.5% maximum
RCA Output Impedance 10k ohm
Dimensions 14" x 10" x 4" (H x W x D)
Warranty 2 Year Limited
Part Number (PoE) 011116
Part Number (AC powered) 011114
What is the coverage of this device?

When attached to a standard 802.3af port on a PoE switch, you can only attach one horn (8 ohm 30-40 watt rated) with no more than 25 ft. of 16 gauge speaker wire and will cover about 5,000+ sqft depending on ambient background noise.

When attached to a standard 802.3at (high power mode) port on a PoE switch, you can attach two horns (8 ohm 30-40 watt rated) with no more than 13 ft. of 16 gauge speaker wire to each horn and will cover about 10,000+ sqft depending on ambient background noise.

For outdoor paging please refer to Outdoor Notification Testing Example Using the CyberData Paging Amplifier


Typical Installation: PoE 802.3af

Typical Installation: AC Version

Alarm Sensing

Connecting to LED Strobe

Wiring Connections

Amplified Outputs PoE High Power Mode

Amplified Outputs PoE Low Power Mode

Amplified Outputs AC High Power Mode

Amplified Outputs AC Low Power Mode

Mounting

Description

The CyberData SIP-enabled VoIP V2 Loudspeaker Amplifier is for use with Singlewire's paging and emergency notification software InformaCast® or InformaCast® CK. This PoE-powered device hooks up easily to new and existing Singlewire installations. With up to 25 watts of driving power (802.3at), the Amplifier provides direct drive of a standard Horn speaker and supports a line out connector for connection to an external amplifier. The interface is compatible with most SIP-based IP PBX servers that comply with the SIP RFC 3261. For non-SIP environments, the Paging Amplifier can be configured to listen to Multicast address and port number combinations to form paging zones.

Features

  • InformaCast® compliant
  • InformaCast® CK compliant
  • Supports SingleWire/Informacast Server Resilience
  • Dual speed 10/100 Mbps
  • Weather-resistant NEMA enclosure
  • Web-base firmware upgradeable
  • Power-over-ethernet enabled
  • IGMP

Specs

Protocol InformaCast® v4.0 and later
Ethernet I/F 10/100 Mbps
Power Input PoE 802.3at or 802.3af
Operating Temperature -10 degrees C to 50 degrees C (14 degrees F to 122 degrees F)
Payload Types G711
Output Level, 802.3af: Up to 8 watts
Output Level, 802.3at: Up to 25 watts
RCA Output Signal Amplitudes 2.0 VPP maximum
RCA Output Level +2dBm nominal
RCA Total Harmonic Distortion 0.5% maximum
RCA Output Impedance 10k ohm
Dimensions 14" x 10" x 4" (H x W x D)
Warranty 2 Year Limited
Part Number (PoE) 011116
Part Number (AC powered) 011114

FAQs

What is the coverage of this device?

When attached to a standard 802.3af port on a PoE switch, you can only attach one horn (8 ohm 30-40 watt rated) with no more than 25 ft. of 16 gauge speaker wire and will cover about 5,000+ sqft depending on ambient background noise.

When attached to a standard 802.3at (high power mode) port on a PoE switch, you can attach two horns (8 ohm 30-40 watt rated) with no more than 13 ft. of 16 gauge speaker wire to each horn and will cover about 10,000+ sqft depending on ambient background noise.

For outdoor paging please refer to Outdoor Notification Testing Example Using the CyberData Paging Amplifier

Installation


Typical Installation: PoE 802.3af

Typical Installation: AC Version

Alarm Sensing

Connecting to LED Strobe

Wiring Connections

Amplified Outputs PoE High Power Mode

Amplified Outputs PoE Low Power Mode

Amplified Outputs AC High Power Mode

Amplified Outputs AC Low Power Mode

Mounting

Downloads