011398/011397 SIP Talk-Back Speaker

Part Number: 011398

MSRP: $458.00

Each CyberData device comes with a Two-Year Warranty. Extended Warranty extends your warranty for an additional two years. Already have a CyberData device and want to add a Two-Year Warranty? Please click the link below to register your device first:

http://support.cyberdata.net/register.php

CyberData’s Try & Buy program allows you to order QTY (1) of any SIP device and try it for 30 days to determine if it will meet your needs. When “Try and Buy" is selected, we charge on shipment and we will apply a credit IF the product is returned through our RMA process within 30 days, in good condition in its original packaging.

Once returned and upon inspection, CyberData will apply the credit to your credit card, less any shipping and handling charges that CyberData incurs. No returns are accepted after 30 days under our Try & Buy program.

Need help configuring your devices?

CyberData's SIP Talk-Back Speaker enables full-duplex two-way conversations in settings such as classrooms, offices, medical facilities and clinics. When used with the Remote Call Button, calls to a predetermined extension can be initiated from the room with the speaker.  Alternatively, a call can be placed to the speaker to initiate either a page or two-way conversation.

The SIP Talk-Back Speaker easily connects into local area networks with a single CAT5/6 cable from your PoE switch. Its small footprint allows the speaker to be mounted almost anywhere with multiple mounting options available.

CyberData has maintained one of the most comprehensive lists of IP PBX servers certified to work with CyberData VoIP Products

  • Full-duplex audio with configurable echo cancelling
  • Adaptive half duplex audio with configurable VOX (Voice Operated Switch) settings
  • Half duplex push to talk audio from the phone side using the phone's keypad or from the speaker side using CyberData's Remote Call Button
  • Audio health check to verify hardware performance that can be scheduled or launched manually
  • Supports a Monitor Mode
  •  

  • Simultaneous SIP and multicast
  • Paging prioritization
  • User-uploadable ring and alert tones
  • Support for security code to prevent unwanted SIP calls
  • Can receive pages directly from Poly phones as well as other devices that can send standard multicast
  • Loud/Night Ringer function - second SIP extension
  • Support for 10 multicast paging groups
  •  

  • Can drive one external analog speaker for greater coverage
  • DTMF-controlled relay
  • Line-out connection
  • Network and manual speaker volume control
  •  

  • TLS 1.2 enhanced security for IP Endpoints in a local or cloud-based environment
  • Autoprovisioning via HTTP, HTTPS, or TFTP
  • HTTPS or HTTP web based configuration. HTTPS is enabled by default.
  • 802.11q VLAN tagging
  • Configurable event generation for device health and status monitoring
  • Web-based upgradeable firmware
  • Support for multiple SIP servers for redundancy
  •  

    Ethernet I/F 10/100 Mbps
    Protocol SIP RFC 3261 Compatible
    Power Input PoE 802.3af/802.3at compliant or 24VDC @ 1A Auxiliary Power Supply (not included)
    Audio Output  802.3af: 103 dB @ 1 meter
    802.3at: 105 dB @ 1 meter
    On-Board Relay 1A @ 30 VDC
    Payload Types G.711 a-law, G.711 µ-law, G.722 and G.729
    Network Security TLS/SSL 1.2
    Operating Range Temperature: -40 degrees C to 55 degrees C (-40 degrees F to 131 degrees F)
    Humidity: 5-95%, non-condensing
    Storage Temperature -40 degrees C to 70 degrees C (-40 degrees F to 158 degrees F)
    Storage Altitude Up to 15,000 ft. (4573 m)
    Dimensions*
    9 in. [228.6 mm] Grill Diameter
    7.25 in. [184.2 mm] Can Diameter
    2.4 in. [60.96 mm] Can Depth
    Weight 3.0 lbs. [1.36 kg]
    Boxed Weight 4.0 lbs. [1.81 kg]
    Compliance CE; EMC Directive - Class A EN 55032 & EN 55024, LV Safety Directive- EN 60950-1, RoHS Compliant, FCC; Part 15 Class A, Industry Canada; ICES-3 Class A, IEEE 802.3 Compliant
    Warranty 2 Year Limited
    Part Number/Color 011398/RAL 9003 (Signal White)

    *Dimensions are measured from the perspective of the product being upright with the front of the product facing you.

    What is multicast?

    IP multicast is a technique for one-to-many communication over a local IP network. IGMP multicast is sent via UDP packets from a multicast server to a multicast receiver. This stream scales to a larger receiver population by not requiring prior knowledge of who or how many receivers there are. Multicast uses network infrastructure efficiently by requiring the source to send a packet only once, even if it needs to be delivered to many receivers. The network replicates the packet in order to reach multiple receivers only when necessary.

    Multicast is a great alternative to SIP registration as it does not require that the recipient of the stream to register as an extension on an IP-PBX server.

    CyberData products support both regular IGMP multicast as well as proprietary Polycom Group Paging.

    Are there a set of specs. or standards that define proper spacing for your IP Speakers along a hallway?

    In a ceiling mount, you would want about 1 speaker per every 10-15 feet of hallway length. If you used the paging amp you could use 3 paging amps per 100 feet. This assumes average ambient noise and surface attenuation levels.

    I am unable to connect with the unit when it is plugged into a Cisco SLM 224P switch.

    The cables or switch ports that you are connecting to are set in switch or hub mode instead of endpoint stations. The MDIX setting needs to be changed to MDI since our VoIP products are end stations. From the Cisco SLM 224P User Guide:

    Change to MDI: MDI/MDIX displays the Media Dependent Interface (MDI) / Media Dependent Interface with Crossover (MDIX) status on the port. Hubs and switches are deliberately wired the opposite of the way end stations are wired, so that when a hub or switch is connected to an end station, a straight through Ethernet cable can be used, and the pairs are matched up properly. When two hubs or switches are connected to each other, or two end stations are connected to each other, a crossover cable is used to ensure that the correct pairs are connected. The possible field values are: MDIX

    Use for hubs and switches. MDI Use for end stations.
    I have a Cisco 6513 switch. When I plug in a CyberData VoIP device, the device constantly reboots and will not register to the SIP server.

    Please adjust the switch power selection to Power inline static, as opposed to Power inline dynamic. This will allow the device to continuously receive 15.4W of power.

    I have a Cisco Catalyst series switch. How do I set the unit so that it can use PoE (under 15.4w) instead of an external power source?

    There are known PoE limitations with third party devices on the Cisco Catalyst series switches. This includes the 2500, 3500, and 6500 series switches. It's important to keep in mind that CyberData devices are considered third party devices and require switch port setting adjustments. Be sure to turn power policing off if it has been enabled on your switch. Power policing is disabled by default. Also, configure your port for no shutdown. Use the following command to configure inline power: power inline static max 15400.

    What IP phones do you recommend for setting up a Peer to Peer with this device?


        Typical Installation


        Running the Speaker with a Remote Call Button


        AC Power


        LED Strobe


        Auxilliary Analog Speaker


        Amplifier


        Amplifier


        Ceiling Mounting


        Ceiling Tile Mounting with Reinforcement Mount


        Speaker to Strobe Connections
    Documentation
    Description Date
    PDF Datasheet DATE:7/8/19
    PDF Quick Start Guide DATE:11/7/18
    PDF Quick Reference Placemat DATE:8/16/19
    PDF Operations Guide (firmware version 12.0.0) DATE:10/22/19
    PDF Operations Guide (firmware version 11.6.9) DATE:1/4/19
    PDF Operations Guide (firmware version 11.6.7) DATE:5/17/17
    PDF Operations Guide (firmware version 11.6.6) DATE:11/18/16
    PDF Operations Guide (firmware version 11.6.2) DATE:7/27/16
    PDF CE Declaration of Conformity DATE:5/15/17
    Connecting to Compatible IP-PBX Servers
    Firmware, Drivers & Utilities
    ZIP Firmware 12.0.2. For more information, see the release notes. DATE:11/19/19
    ZIP Firmware 12.0.0. For more information, see the release notes. DATE:6/27/19
    ZIP Firmware 11.6.9. For more information, see the release notes. DATE:8/3/17
    ZIP Firmware 11.6.7 , autoprovisioning template, and release notes. Please note that a firmware upgrade could change your configuration. Therefore, please be sure to back up your configuration before upgrading your firmware. DATE:12/02/16
    ZIP Firmware 11.6.6 , autoprovisioning template, and release notes. Please note that a firmware upgrade could change your configuration. Therefore, please be sure to back up your configuration before upgrading your firmware. DATE:9/14/16
    ZIP Firmware 11.6.4 , autoprovisioning template, and release notes. Please note that a firmware upgrade could change your configuration. Therefore, please be sure to back up your configuration before upgrading your firmware. DATE:8/3/16
    ZIP Firmware 11.6.2 , autoprovisioning template, and release notes. Please note that a firmware upgrade could change your configuration. Therefore, please be sure to back up your configuration before upgrading your firmware. DATE:7/12/16
    ZIP The SolarWinds TFTP server is used when autoprovisioning firmware updates or audio files.
    ZIP The Discovery Utility scans the network and reports back any found VoIP devices that are attached to the physical network.

     

    Calculator

    Use the Speaker Calculator below to estimate the approximate number of speakers needed for any given space with a maximum ceiling height of 15 ft.

    If the ceiling height is higher than 15 ft, please contact sales@cyberdata.net for assistance and guidance.

    The speaker calculations are based on equal-sided, unobstructed rooms. For elongated rooms like hallways or for obstructed rooms, additional IP Speakers may be required.

    Description

    CyberData's SIP Talk-Back Speaker enables full-duplex two-way conversations in settings such as classrooms, offices, medical facilities and clinics. When used with the Remote Call Button, calls to a predetermined extension can be initiated from the room with the speaker.  Alternatively, a call can be placed to the speaker to initiate either a page or two-way conversation.

    The SIP Talk-Back Speaker easily connects into local area networks with a single CAT5/6 cable from your PoE switch. Its small footprint allows the speaker to be mounted almost anywhere with multiple mounting options available.

    CyberData has maintained one of the most comprehensive lists of IP PBX servers certified to work with CyberData VoIP Products

    Features

  • Full-duplex audio with configurable echo cancelling
  • Adaptive half duplex audio with configurable VOX (Voice Operated Switch) settings
  • Half duplex push to talk audio from the phone side using the phone's keypad or from the speaker side using CyberData's Remote Call Button
  • Audio health check to verify hardware performance that can be scheduled or launched manually
  • Supports a Monitor Mode
  •  

  • Simultaneous SIP and multicast
  • Paging prioritization
  • User-uploadable ring and alert tones
  • Support for security code to prevent unwanted SIP calls
  • Can receive pages directly from Poly phones as well as other devices that can send standard multicast
  • Loud/Night Ringer function - second SIP extension
  • Support for 10 multicast paging groups
  •  

  • Can drive one external analog speaker for greater coverage
  • DTMF-controlled relay
  • Line-out connection
  • Network and manual speaker volume control
  •  

  • TLS 1.2 enhanced security for IP Endpoints in a local or cloud-based environment
  • Autoprovisioning via HTTP, HTTPS, or TFTP
  • HTTPS or HTTP web based configuration. HTTPS is enabled by default.
  • 802.11q VLAN tagging
  • Configurable event generation for device health and status monitoring
  • Web-based upgradeable firmware
  • Support for multiple SIP servers for redundancy
  • Specs

     

    Ethernet I/F 10/100 Mbps
    Protocol SIP RFC 3261 Compatible
    Power Input PoE 802.3af/802.3at compliant or 24VDC @ 1A Auxiliary Power Supply (not included)
    Audio Output  802.3af: 103 dB @ 1 meter
    802.3at: 105 dB @ 1 meter
    On-Board Relay 1A @ 30 VDC
    Payload Types G.711 a-law, G.711 µ-law, G.722 and G.729
    Network Security TLS/SSL 1.2
    Operating Range Temperature: -40 degrees C to 55 degrees C (-40 degrees F to 131 degrees F)
    Humidity: 5-95%, non-condensing
    Storage Temperature -40 degrees C to 70 degrees C (-40 degrees F to 158 degrees F)
    Storage Altitude Up to 15,000 ft. (4573 m)
    Dimensions*
    9 in. [228.6 mm] Grill Diameter
    7.25 in. [184.2 mm] Can Diameter
    2.4 in. [60.96 mm] Can Depth
    Weight 3.0 lbs. [1.36 kg]
    Boxed Weight 4.0 lbs. [1.81 kg]
    Compliance CE; EMC Directive - Class A EN 55032 & EN 55024, LV Safety Directive- EN 60950-1, RoHS Compliant, FCC; Part 15 Class A, Industry Canada; ICES-3 Class A, IEEE 802.3 Compliant
    Warranty 2 Year Limited
    Part Number/Color 011398/RAL 9003 (Signal White)

    *Dimensions are measured from the perspective of the product being upright with the front of the product facing you.

    FAQs

    What is multicast?

    IP multicast is a technique for one-to-many communication over a local IP network. IGMP multicast is sent via UDP packets from a multicast server to a multicast receiver. This stream scales to a larger receiver population by not requiring prior knowledge of who or how many receivers there are. Multicast uses network infrastructure efficiently by requiring the source to send a packet only once, even if it needs to be delivered to many receivers. The network replicates the packet in order to reach multiple receivers only when necessary.

    Multicast is a great alternative to SIP registration as it does not require that the recipient of the stream to register as an extension on an IP-PBX server.

    CyberData products support both regular IGMP multicast as well as proprietary Polycom Group Paging.

    Are there a set of specs. or standards that define proper spacing for your IP Speakers along a hallway?

    In a ceiling mount, you would want about 1 speaker per every 10-15 feet of hallway length. If you used the paging amp you could use 3 paging amps per 100 feet. This assumes average ambient noise and surface attenuation levels.

    I am unable to connect with the unit when it is plugged into a Cisco SLM 224P switch.

    The cables or switch ports that you are connecting to are set in switch or hub mode instead of endpoint stations. The MDIX setting needs to be changed to MDI since our VoIP products are end stations. From the Cisco SLM 224P User Guide:

    Change to MDI: MDI/MDIX displays the Media Dependent Interface (MDI) / Media Dependent Interface with Crossover (MDIX) status on the port. Hubs and switches are deliberately wired the opposite of the way end stations are wired, so that when a hub or switch is connected to an end station, a straight through Ethernet cable can be used, and the pairs are matched up properly. When two hubs or switches are connected to each other, or two end stations are connected to each other, a crossover cable is used to ensure that the correct pairs are connected. The possible field values are: MDIX

    Use for hubs and switches. MDI Use for end stations.
    I have a Cisco 6513 switch. When I plug in a CyberData VoIP device, the device constantly reboots and will not register to the SIP server.

    Please adjust the switch power selection to Power inline static, as opposed to Power inline dynamic. This will allow the device to continuously receive 15.4W of power.

    I have a Cisco Catalyst series switch. How do I set the unit so that it can use PoE (under 15.4w) instead of an external power source?

    There are known PoE limitations with third party devices on the Cisco Catalyst series switches. This includes the 2500, 3500, and 6500 series switches. It's important to keep in mind that CyberData devices are considered third party devices and require switch port setting adjustments. Be sure to turn power policing off if it has been enabled on your switch. Power policing is disabled by default. Also, configure your port for no shutdown. Use the following command to configure inline power: power inline static max 15400.

    What IP phones do you recommend for setting up a Peer to Peer with this device?

    Installation



        Typical Installation


        Running the Speaker with a Remote Call Button


        AC Power


        LED Strobe


        Auxilliary Analog Speaker


        Amplifier


        Amplifier


        Ceiling Mounting


        Ceiling Tile Mounting with Reinforcement Mount


        Speaker to Strobe Connections

    Downloads

    Documentation
    Description Date
    PDF Datasheet DATE:7/8/19
    PDF Quick Start Guide DATE:11/7/18
    PDF Quick Reference Placemat DATE:8/16/19
    PDF Operations Guide (firmware version 12.0.0) DATE:10/22/19
    PDF Operations Guide (firmware version 11.6.9) DATE:1/4/19
    PDF Operations Guide (firmware version 11.6.7) DATE:5/17/17
    PDF Operations Guide (firmware version 11.6.6) DATE:11/18/16
    PDF Operations Guide (firmware version 11.6.2) DATE:7/27/16
    PDF CE Declaration of Conformity DATE:5/15/17
    Connecting to Compatible IP-PBX Servers
    Firmware, Drivers & Utilities
    ZIP Firmware 12.0.2. For more information, see the release notes. DATE:11/19/19
    ZIP Firmware 12.0.0. For more information, see the release notes. DATE:6/27/19
    ZIP Firmware 11.6.9. For more information, see the release notes. DATE:8/3/17
    ZIP Firmware 11.6.7 , autoprovisioning template, and release notes. Please note that a firmware upgrade could change your configuration. Therefore, please be sure to back up your configuration before upgrading your firmware. DATE:12/02/16
    ZIP Firmware 11.6.6 , autoprovisioning template, and release notes. Please note that a firmware upgrade could change your configuration. Therefore, please be sure to back up your configuration before upgrading your firmware. DATE:9/14/16
    ZIP Firmware 11.6.4 , autoprovisioning template, and release notes. Please note that a firmware upgrade could change your configuration. Therefore, please be sure to back up your configuration before upgrading your firmware. DATE:8/3/16
    ZIP Firmware 11.6.2 , autoprovisioning template, and release notes. Please note that a firmware upgrade could change your configuration. Therefore, please be sure to back up your configuration before upgrading your firmware. DATE:7/12/16
    ZIP The SolarWinds TFTP server is used when autoprovisioning firmware updates or audio files.
    ZIP The Discovery Utility scans the network and reports back any found VoIP devices that are attached to the physical network.

     

    Calculator

    Calculator

    Use the Speaker Calculator below to estimate the approximate number of speakers needed for any given space with a maximum ceiling height of 15 ft.

    If the ceiling height is higher than 15 ft, please contact sales@cyberdata.net for assistance and guidance.

    The speaker calculations are based on equal-sided, unobstructed rooms. For elongated rooms like hallways or for obstructed rooms, additional IP Speakers may be required.