011398 SIP Talk-Back Speaker - RAL 9003 (Signal White) (Replacement Product Below)

Part Number: 011398

MSRP: $0.00

CyberData's SIP Talk-Back Speaker enables full-duplex two-way conversations in settings such as classrooms, offices, medical facilities and clinics. When used with the Remote Call Button, calls to a predetermined extension can be initiated from the room with the speaker.  Alternatively, a call can be placed to the speaker to initiate either a page or two-way conversation.

The SIP Talk-Back Speaker easily connects into local area networks with a single CAT5/6 cable from your PoE switch. Its small footprint allows the speaker to be mounted almost anywhere with multiple mounting options available.

CyberData has maintained one of the most comprehensive lists of IP PBX servers certified to work with CyberData VoIP Products

  • Full-duplex audio with configurable echo cancelling
  • Adaptive half duplex audio with configurable VOX (Voice Operated Switch) settings
  • Half duplex push to talk audio from the phone side using the phone's keypad or from the speaker side using CyberData's Remote Call Button
  • Audio health check to verify hardware performance that can be scheduled or launched manually
  • Supports a Monitor Mode
  •  

  • Simultaneous SIP and multicast
  • Paging prioritization
  • User-uploadable ring and alert tones
  • Support for security code to prevent unwanted SIP calls
  • Can receive pages directly from Poly phones as well as other devices that can send standard multicast
  • Loud/Night Ringer function - second SIP extension
  • Support for 10 multicast paging groups
  •  

  • Can drive one external analog speaker for greater coverage
  • DTMF-controlled relay
  • Line-out connection
  • Network and manual speaker volume control
  •  

  • TLS 1.2 and SRTP enhanced security for IP Endpoints in a local or cloud-based environment
  • Autoprovisioning via HTTP, HTTPS, or TFTP
  • HTTPS or HTTP web based configuration. HTTPS is enabled by default.
  • 802.11q VLAN tagging
  • Configurable event generation for device health and status monitoring
  • Web-based upgradeable firmware
  • Support for multiple SIP servers for redundancy
  •  

    Ethernet I/F 10/100 Mbps
    Protocol SIP RFC 3261 Compatible
    Power Input PoE 802.3af/802.3at compliant or 24VDC @ 1A Auxiliary Power Supply (not included)
    Audio Output  802.3af: 103 dB @ 1 meter
    802.3at: 105 dB @ 1 meter
    On-Board Relay 1A @ 30 VDC
    Payload Types G.711 a-law, G.711 µ-law, G.722 and G.729
    Network Security TLS/SSL 1.2 and SRTP
    Operating Range Temperature: -40 degrees C to 55 degrees C (-40 degrees F to 131 degrees F)
    Humidity: 5-95%, non-condensing
    Storage Temperature -40 degrees C to 70 degrees C (-40 degrees F to 158 degrees F)
    Storage Altitude Up to 15,000 ft. (4573 m)
    Dimensions*
    9 in. [228.6 mm] Grill Diameter
    7.25 in. [184.2 mm] Can Diameter
    2.4 in. [60.96 mm] Can Depth
    Weight 3.0 lbs. [1.36 kg]
    Boxed Weight 4.0 lbs. [1.81 kg]
    Compliance CE; EMC Directive - Class A EN 55032 & EN 55024, LV Safety Directive- EN 60950-1, RoHS Compliant, FCC; Part 15 Class A, Industry Canada; ICES-3 Class A, IEEE 802.3 Compliant
    Warranty 2 Year Limited
    Part Number/Color 011398/RAL 9003 (Signal White)

    *Dimensions are measured from the perspective of the product being upright with the front of the product facing you.

    Where should I install this product?

    The SIP Speakers are all designed for a quieter environment such as a classroom, hallway, or an office. If you need a speaker for a high noise/harsh conditions environment such as a warehouse floor or a school field, we instead recommend the 011457 SIP IP66 Outdoor Horn. In the case of requiring two-way audio like our SIP Talk-Back Speaker provides, the CyberData Intercoms may be a better choice for a louder environment. Please contact our sales team for more information.

    How do I update my firmware?

    Go to the Downloads tab, click on the serial number range matching your device and download the firmware compatible with it. To update the firmware, unzip the file and log in to the web GUI for the device you are trying to upgrade. Navigate to the Firmware tab and browse for the firmware file you just downloaded. Select and upload that file. Do not reboot, the device will do it for you. For more information, please check your product’s Operations Guide, also available under the Downloads tab.

    PLEASE NOTE: If you are downgrading, please contact CyberData’s Technical Support Department first to ensure the device does not get damaged. We also recommend you export a copy of your current configuration BEFORE updating, should a loss of power or another issue occur that would potentially lose your settings.

    Is this device compatible with my service provider or IP-PBX server?

    CyberData VoIP products are compatible with IP-PBX servers that support standard SIP protocol. You can find a full list of IP-PBX servers that CyberData products have been validated on by going to Connecting to Compatible IP-PBX Servers. If you do not see your IP-PBX on this list, feel free to contact CyberData’s Technical Support Department for more information.

    What is multicast?

    IP multicast is a technique for one-to-many communication over a local IP network. IGMP multicast is sent via UDP packets from a multicast server to a multicast receiver. This stream scales to a larger receiver population by not requiring prior knowledge of who or how many receivers there are. Multicast uses network infrastructure efficiently by requiring the source to send a packet only once, even if it needs to be delivered to many receivers. The network replicates the packet in order to reach multiple receivers only when necessary.

    Multicast is a great alternative to SIP registration as it does not require that the recipient of the stream to register as an extension on an IP-PBX server.

    CyberData products support both regular IGMP multicast as well as proprietary Polycom Group Paging.

    Which IP Phones do you recommend for setting up a Peer to Peer SIP call with this device?
    For additional support or answers to questions not covered on this page, who should I contact?


        Typical Installation


        Running the Speaker with a Remote Call Button


        AC Power


        LED Strobe


        Auxilliary Analog Speaker


        Amplifier


        Ceiling Mounting


        Ceiling Tile Mounting with Reinforcement Mount


        Speaker to Strobe Connections
    Documentation
    Description Date
    PDF Datasheet DATE:4/6/20
    PDF Quick Start Guide DATE:3/4/21
    PDF Quick Reference Placemat DATE:8/16/19
    PDF Operations Guide (firmware version 12.1.0) DATE:4/2/20
    PDF Operations Guide (firmware version 12.0.0) DATE:10/22/19
    PDF Operations Guide (firmware version 11.6.9) DATE:1/4/19
    PDF Operations Guide (firmware version 11.6.7) DATE:5/17/17
    PDF Operations Guide (firmware version 11.6.6) DATE:11/18/16
    PDF Operations Guide (firmware version 11.6.2) DATE:7/27/16
    PDF CyberData Night Ringer Explained DATE:3/25/20
    PDF CE Declaration of Conformity DATE:5/15/17
    Connecting to Compatible IP-PBX Servers
    Firmware, Drivers & Utilities
    ZIP Firmware 12.1.1. For more information, see the release notes. DATE:6/5/20
    ZIP Firmware 12.1.0. For more information, see the release notes. DATE:4/2/20
    ZIP Firmware 12.0.2. For more information, see the release notes. DATE:11/19/19
    ZIP Firmware 12.0.0. For more information, see the release notes. DATE:6/27/19
    ZIP Firmware 11.6.9. For more information, see the release notes. DATE:8/3/17
    ZIP Firmware 11.6.7 , autoprovisioning template, and release notes. Please note that a firmware upgrade could change your configuration. Therefore, please be sure to back up your configuration before upgrading your firmware. DATE:12/02/16
    ZIP Firmware 11.6.6 , autoprovisioning template, and release notes. Please note that a firmware upgrade could change your configuration. Therefore, please be sure to back up your configuration before upgrading your firmware. DATE:9/14/16
    ZIP Firmware 11.6.4 , autoprovisioning template, and release notes. Please note that a firmware upgrade could change your configuration. Therefore, please be sure to back up your configuration before upgrading your firmware. DATE:8/3/16
    ZIP Firmware 11.6.2 , autoprovisioning template, and release notes. Please note that a firmware upgrade could change your configuration. Therefore, please be sure to back up your configuration before upgrading your firmware. DATE:7/12/16
    ZIP The SolarWinds TFTP server is used when autoprovisioning firmware updates or audio files.
    ZIP The Discovery Utility scans the network and reports back any found VoIP devices that are attached to the physical network.

     

    Description

    CyberData's SIP Talk-Back Speaker enables full-duplex two-way conversations in settings such as classrooms, offices, medical facilities and clinics. When used with the Remote Call Button, calls to a predetermined extension can be initiated from the room with the speaker.  Alternatively, a call can be placed to the speaker to initiate either a page or two-way conversation.

    The SIP Talk-Back Speaker easily connects into local area networks with a single CAT5/6 cable from your PoE switch. Its small footprint allows the speaker to be mounted almost anywhere with multiple mounting options available.

    CyberData has maintained one of the most comprehensive lists of IP PBX servers certified to work with CyberData VoIP Products

    Features

  • Full-duplex audio with configurable echo cancelling
  • Adaptive half duplex audio with configurable VOX (Voice Operated Switch) settings
  • Half duplex push to talk audio from the phone side using the phone's keypad or from the speaker side using CyberData's Remote Call Button
  • Audio health check to verify hardware performance that can be scheduled or launched manually
  • Supports a Monitor Mode
  •  

  • Simultaneous SIP and multicast
  • Paging prioritization
  • User-uploadable ring and alert tones
  • Support for security code to prevent unwanted SIP calls
  • Can receive pages directly from Poly phones as well as other devices that can send standard multicast
  • Loud/Night Ringer function - second SIP extension
  • Support for 10 multicast paging groups
  •  

  • Can drive one external analog speaker for greater coverage
  • DTMF-controlled relay
  • Line-out connection
  • Network and manual speaker volume control
  •  

  • TLS 1.2 and SRTP enhanced security for IP Endpoints in a local or cloud-based environment
  • Autoprovisioning via HTTP, HTTPS, or TFTP
  • HTTPS or HTTP web based configuration. HTTPS is enabled by default.
  • 802.11q VLAN tagging
  • Configurable event generation for device health and status monitoring
  • Web-based upgradeable firmware
  • Support for multiple SIP servers for redundancy
  • Specs

     

    Ethernet I/F 10/100 Mbps
    Protocol SIP RFC 3261 Compatible
    Power Input PoE 802.3af/802.3at compliant or 24VDC @ 1A Auxiliary Power Supply (not included)
    Audio Output  802.3af: 103 dB @ 1 meter
    802.3at: 105 dB @ 1 meter
    On-Board Relay 1A @ 30 VDC
    Payload Types G.711 a-law, G.711 µ-law, G.722 and G.729
    Network Security TLS/SSL 1.2 and SRTP
    Operating Range Temperature: -40 degrees C to 55 degrees C (-40 degrees F to 131 degrees F)
    Humidity: 5-95%, non-condensing
    Storage Temperature -40 degrees C to 70 degrees C (-40 degrees F to 158 degrees F)
    Storage Altitude Up to 15,000 ft. (4573 m)
    Dimensions*
    9 in. [228.6 mm] Grill Diameter
    7.25 in. [184.2 mm] Can Diameter
    2.4 in. [60.96 mm] Can Depth
    Weight 3.0 lbs. [1.36 kg]
    Boxed Weight 4.0 lbs. [1.81 kg]
    Compliance CE; EMC Directive - Class A EN 55032 & EN 55024, LV Safety Directive- EN 60950-1, RoHS Compliant, FCC; Part 15 Class A, Industry Canada; ICES-3 Class A, IEEE 802.3 Compliant
    Warranty 2 Year Limited
    Part Number/Color 011398/RAL 9003 (Signal White)

    *Dimensions are measured from the perspective of the product being upright with the front of the product facing you.

    FAQs

    Where should I install this product?

    The SIP Speakers are all designed for a quieter environment such as a classroom, hallway, or an office. If you need a speaker for a high noise/harsh conditions environment such as a warehouse floor or a school field, we instead recommend the 011457 SIP IP66 Outdoor Horn. In the case of requiring two-way audio like our SIP Talk-Back Speaker provides, the CyberData Intercoms may be a better choice for a louder environment. Please contact our sales team for more information.

    How do I update my firmware?

    Go to the Downloads tab, click on the serial number range matching your device and download the firmware compatible with it. To update the firmware, unzip the file and log in to the web GUI for the device you are trying to upgrade. Navigate to the Firmware tab and browse for the firmware file you just downloaded. Select and upload that file. Do not reboot, the device will do it for you. For more information, please check your product’s Operations Guide, also available under the Downloads tab.

    PLEASE NOTE: If you are downgrading, please contact CyberData’s Technical Support Department first to ensure the device does not get damaged. We also recommend you export a copy of your current configuration BEFORE updating, should a loss of power or another issue occur that would potentially lose your settings.

    Is this device compatible with my service provider or IP-PBX server?

    CyberData VoIP products are compatible with IP-PBX servers that support standard SIP protocol. You can find a full list of IP-PBX servers that CyberData products have been validated on by going to Connecting to Compatible IP-PBX Servers. If you do not see your IP-PBX on this list, feel free to contact CyberData’s Technical Support Department for more information.

    What is multicast?

    IP multicast is a technique for one-to-many communication over a local IP network. IGMP multicast is sent via UDP packets from a multicast server to a multicast receiver. This stream scales to a larger receiver population by not requiring prior knowledge of who or how many receivers there are. Multicast uses network infrastructure efficiently by requiring the source to send a packet only once, even if it needs to be delivered to many receivers. The network replicates the packet in order to reach multiple receivers only when necessary.

    Multicast is a great alternative to SIP registration as it does not require that the recipient of the stream to register as an extension on an IP-PBX server.

    CyberData products support both regular IGMP multicast as well as proprietary Polycom Group Paging.

    Which IP Phones do you recommend for setting up a Peer to Peer SIP call with this device?
    For additional support or answers to questions not covered on this page, who should I contact?

    Installation



        Typical Installation


        Running the Speaker with a Remote Call Button


        AC Power


        LED Strobe


        Auxilliary Analog Speaker


        Amplifier


        Ceiling Mounting


        Ceiling Tile Mounting with Reinforcement Mount


        Speaker to Strobe Connections

    Downloads

    Documentation
    Description Date
    PDF Datasheet DATE:4/6/20
    PDF Quick Start Guide DATE:3/4/21
    PDF Quick Reference Placemat DATE:8/16/19
    PDF Operations Guide (firmware version 12.1.0) DATE:4/2/20
    PDF Operations Guide (firmware version 12.0.0) DATE:10/22/19
    PDF Operations Guide (firmware version 11.6.9) DATE:1/4/19
    PDF Operations Guide (firmware version 11.6.7) DATE:5/17/17
    PDF Operations Guide (firmware version 11.6.6) DATE:11/18/16
    PDF Operations Guide (firmware version 11.6.2) DATE:7/27/16
    PDF CyberData Night Ringer Explained DATE:3/25/20
    PDF CE Declaration of Conformity DATE:5/15/17
    Connecting to Compatible IP-PBX Servers
    Firmware, Drivers & Utilities
    ZIP Firmware 12.1.1. For more information, see the release notes. DATE:6/5/20
    ZIP Firmware 12.1.0. For more information, see the release notes. DATE:4/2/20
    ZIP Firmware 12.0.2. For more information, see the release notes. DATE:11/19/19
    ZIP Firmware 12.0.0. For more information, see the release notes. DATE:6/27/19
    ZIP Firmware 11.6.9. For more information, see the release notes. DATE:8/3/17
    ZIP Firmware 11.6.7 , autoprovisioning template, and release notes. Please note that a firmware upgrade could change your configuration. Therefore, please be sure to back up your configuration before upgrading your firmware. DATE:12/02/16
    ZIP Firmware 11.6.6 , autoprovisioning template, and release notes. Please note that a firmware upgrade could change your configuration. Therefore, please be sure to back up your configuration before upgrading your firmware. DATE:9/14/16
    ZIP Firmware 11.6.4 , autoprovisioning template, and release notes. Please note that a firmware upgrade could change your configuration. Therefore, please be sure to back up your configuration before upgrading your firmware. DATE:8/3/16
    ZIP Firmware 11.6.2 , autoprovisioning template, and release notes. Please note that a firmware upgrade could change your configuration. Therefore, please be sure to back up your configuration before upgrading your firmware. DATE:7/12/16
    ZIP The SolarWinds TFTP server is used when autoprovisioning firmware updates or audio files.
    ZIP The Discovery Utility scans the network and reports back any found VoIP devices that are attached to the physical network.