011527 WiFi Alert Button

Part Number: 011527

MSRP: $234.00

Each CyberData device comes with a Two-Year Warranty. Extended Warranty extends your warranty for an additional two years. Already have a CyberData device and want to add a Two-Year Warranty? Please click the link below to register your device first:

https://support.cyberdata.net/portal/en/newticket

CyberData’s Try & Buy program allows you to order QTY (1) of any SIP device and try it for 30 days to determine if it will meet your needs. When “Try and Buy" is selected, we charge on shipment and we will apply a credit IF the product is returned through our RMA process within 30 days, in good condition in its original packaging.

Once returned and upon inspection, CyberData will apply the credit to your credit card, less any shipping and handling charges that CyberData incurs. No returns are accepted after 30 days under our Try & Buy program.

Need help configuring your devices?

The CyberData WiFi Alert Button provides an easy and reliable device that, when pressed, will interact with the designated IP server to generate an appropriate mass notification response.

The WiFi Alert Button is designed to operate in different environments. Paired with the CyberData SIP Paging Server with Bell Scheduler (part #011146), the Button, when activated, will generate an event which triggers the SIP Paging Server to produce the configured notification response.

In an InformaCast environment, the Button sends a message to the InformaCast Server which then creates an event in the InformaCast software to generate the mass notification
response.

The device can be mounted on a wall or discreetly under a desk. Powered by an external +5V supply - such as a cell phone charger - and with a 4-hour back-up battery, the CyberData WiFi Alert Button is a key component to your emergency notification solution.

  • A network of up to 100 Buttons* can be configured with a single CyberData SIP Paging Server or InformaCast Server.
  • Large lighted color button
  • Adjustable button brightness, blink rates and activation time
  • Adjustable buzzer
  • +5V power from USB wall charger with 3 ft cable (included)
  • Built-in battery backup allows up to 4 hours of uninterrupted operation
  • 802.11 b/g/n WiFi support
  • WPA2 PSK
  • WiFi Configuration/Discovery Tool
  • Network battery diagnostic monitoring
  • Over-the-air upgradeable firmware
* The Paging Server supports up to 100 buttons, but network infrastructure could impact the number of attached devices
Wi-Fi 802.11 b/g/n
On-board PCB Antenna Gain of 3.7dBi
Power External +5 Volt supply
Battery Backup Up to four hours
Operating Range Temperature: -40 degrees C to 55 degrees C (-40 degrees F to 131 degrees F)
Humidity: 5-95%, non-condensing
Storage Temperature -40 degrees C to 70 degrees C (-40 degrees F to 158 degrees F)
Storage Altitude Up to 15,000 ft. (4573 m)
Dimensions* Length: 2.95 in. [75 mm]
Width: 1.01 in. [25.7 mm]
Height: 4.53 in. [115 mm]
Weight 0.25 lbs. [0.11 kg]
Boxed Weight 0.45 lbs. [0.2 kg]
Compliance RoHS Compliant
Warranty 2 Years Limited
Part Number 011527

*Dimensions are measured from the perspective of the product being upright with the front of the product facing you.

Why would I want a WiFi Alert Button?

The WiFi alert button is an economical alternative to a SIP Call Button. Since this button is USB-Powered and communicates over Wi-Fi it can be installed in many different areas when compared to the SIP based variant. If you need to send an alert message over a network, the WiFi Alert button is an excellent option that would not require a new ethernet connection.

Can it work with both a SIP Paging Server AND Singlewire's InformaCast?

Not at the same time, it can work with either individually.

What comes with the WiFi Button?

The CyberData WiFi Alert Button includes the button, a 5-Volt AC to USB charger with a US plug, and a three-foot white USB to Micro-USB right angle cable.

Are any batteries required for the WiFi Button?

No, the WiFi Alert Button comes with an internal Lithium-ion battery to achieve the four-hour battery backup.

How do I get the WiFi Alert Button on my Wi-Fi Network?

Connect the WiFi button to a windows-based PC and use the CyberData Wi-Fi button utility. For more in-depth steps please review the documentation.

What Wi-Fi frequencies does the WiFi Alert Button Support?

2.3gz

Is the color of the LED button customizable?

No, the button can only illuminate blue.

Do I have to use the included AC to USB power supply?

No, it can be powered with a 5v transformer. Please consult a local certified electrician for installation assistance.


      Typical Installation


      SIP Paging Server Wi-Fi Button Typical Installation with Generator Backup


      Dimensions


      J1 Power Connection


      Wall Mounting Option


      Mounting Option—Optional Plastic Low Voltage Bracket (Not Included)

Documentation
Documentation
Description Date
PDF Datasheet DATE:3/15/23
PDF Quick Start Guide DATE:3/7/23
PDF Quick-Reference Placemat DATE:3/7/23
PDF Operations Guide DATE:3/7/23
PDF Setup Guide DATE:3/14/23
Firmware, Drivers & Utilities
ZIP WiFi Alert Button Setup Utility and Drivers DATE:3/9/21
ZIP Firmware 2.4.2 DATE:3/13/23
ZIP Firmware 2.4.0 DATE:3/9/21

Description

The CyberData WiFi Alert Button provides an easy and reliable device that, when pressed, will interact with the designated IP server to generate an appropriate mass notification response.

The WiFi Alert Button is designed to operate in different environments. Paired with the CyberData SIP Paging Server with Bell Scheduler (part #011146), the Button, when activated, will generate an event which triggers the SIP Paging Server to produce the configured notification response.

In an InformaCast environment, the Button sends a message to the InformaCast Server which then creates an event in the InformaCast software to generate the mass notification
response.

The device can be mounted on a wall or discreetly under a desk. Powered by an external +5V supply - such as a cell phone charger - and with a 4-hour back-up battery, the CyberData WiFi Alert Button is a key component to your emergency notification solution.

Features

  • A network of up to 100 Buttons* can be configured with a single CyberData SIP Paging Server or InformaCast Server.
  • Large lighted color button
  • Adjustable button brightness, blink rates and activation time
  • Adjustable buzzer
  • +5V power from USB wall charger with 3 ft cable (included)
  • Built-in battery backup allows up to 4 hours of uninterrupted operation
  • 802.11 b/g/n WiFi support
  • WPA2 PSK
  • WiFi Configuration/Discovery Tool
  • Network battery diagnostic monitoring
  • Over-the-air upgradeable firmware
* The Paging Server supports up to 100 buttons, but network infrastructure could impact the number of attached devices

Specs

Wi-Fi 802.11 b/g/n
On-board PCB Antenna Gain of 3.7dBi
Power External +5 Volt supply
Battery Backup Up to four hours
Operating Range Temperature: -40 degrees C to 55 degrees C (-40 degrees F to 131 degrees F)
Humidity: 5-95%, non-condensing
Storage Temperature -40 degrees C to 70 degrees C (-40 degrees F to 158 degrees F)
Storage Altitude Up to 15,000 ft. (4573 m)
Dimensions* Length: 2.95 in. [75 mm]
Width: 1.01 in. [25.7 mm]
Height: 4.53 in. [115 mm]
Weight 0.25 lbs. [0.11 kg]
Boxed Weight 0.45 lbs. [0.2 kg]
Compliance RoHS Compliant
Warranty 2 Years Limited
Part Number 011527

*Dimensions are measured from the perspective of the product being upright with the front of the product facing you.

FAQs

Why would I want a WiFi Alert Button?

The WiFi alert button is an economical alternative to a SIP Call Button. Since this button is USB-Powered and communicates over Wi-Fi it can be installed in many different areas when compared to the SIP based variant. If you need to send an alert message over a network, the WiFi Alert button is an excellent option that would not require a new ethernet connection.

Can it work with both a SIP Paging Server AND Singlewire's InformaCast?

Not at the same time, it can work with either individually.

What comes with the WiFi Button?

The CyberData WiFi Alert Button includes the button, a 5-Volt AC to USB charger with a US plug, and a three-foot white USB to Micro-USB right angle cable.

Are any batteries required for the WiFi Button?

No, the WiFi Alert Button comes with an internal Lithium-ion battery to achieve the four-hour battery backup.

How do I get the WiFi Alert Button on my Wi-Fi Network?

Connect the WiFi button to a windows-based PC and use the CyberData Wi-Fi button utility. For more in-depth steps please review the documentation.

What Wi-Fi frequencies does the WiFi Alert Button Support?

2.3gz

Is the color of the LED button customizable?

No, the button can only illuminate blue.

Do I have to use the included AC to USB power supply?

No, it can be powered with a 5v transformer. Please consult a local certified electrician for installation assistance.

Installation


      Typical Installation


      SIP Paging Server Wi-Fi Button Typical Installation with Generator Backup


      Dimensions


      J1 Power Connection


      Wall Mounting Option


      Mounting Option—Optional Plastic Low Voltage Bracket (Not Included)

Downloads

Documentation
Documentation
Description Date
PDF Datasheet DATE:3/15/23
PDF Quick Start Guide DATE:3/7/23
PDF Quick-Reference Placemat DATE:3/7/23
PDF Operations Guide DATE:3/7/23
PDF Setup Guide DATE:3/14/23
Firmware, Drivers & Utilities
ZIP WiFi Alert Button Setup Utility and Drivers DATE:3/9/21
ZIP Firmware 2.4.2 DATE:3/13/23
ZIP Firmware 2.4.0 DATE:3/9/21