011399 InformaCast® Enabled Talk-Back Speaker - RAL 9002 Gray White (Replacement Product is 011400)

Part Number: 011399 - COLOR DISCONTINUED

MSRP: $0.00

The CyberData InformaCast Enabled Talk-Back Speaker enables two-way conversations, either through downloading SIP credentials from Singlewire InformaCast v12.1, or through an IP-PBX. Enhanced full and half duplex audio settings can be configured to meet the specific needs of your installation.

The InformaCast Enabled Talk-Back Speaker easily connects into local area networks with a single CAT5/6 cable from your PoE switch. Its small footprint allows the speaker to be installed almost anywhere with multiple mounting options available.

  • Full duplex audio with configurable echo cancelling
  • Adaptive half duplex audio with configurable VOX (Voice Operated Switch) settings
  • Half duplex push to talk audio from the phone side using the phone's keypad or from the speaker side using CyberData's Remote Call Button
  • Audio health check to verify hardware performance that can be scheduled or launched manually
  • Supports a Monitor Mode
  •  

  • Dual registration for InformaCast and SIP
  • Supports Singlewire InformaCast High Quality Audio
  • Simultaneous InformaCast, SIP and multicast
  • Support for Cisco SRST resiliency
  •  

  • Supports user-uploadable ring and alert tones, and up to ten stored messages
  • Support for security code to prevent unwanted SIP calls
  • Can receive pages directly from Poly phones as well as other devices that can send standard multicast
  • Loud/Night Ringer function - second SIP extension
  • Support for 10 multicast paging groups with prioritization
  •  

  • Can drive one external analog speaker for greater coverage
  • DTMF-controlled relay
  • Line-out connection
  • Network and manual speaker volume control
  •  

  • TLS 1.2 and SRTP enhanced security for IP Endpoints in a local or cloud-based environment
  • Autoprovisioning via HTTP, HTTPS, or TFTP
  • HTTPS or HTTP web based configuration. HTTPS is enabled by default
  • 802.11q VLAN tagging
  • Configurable event generation for device health and status monitoring
  • Web-based upgradeable firmware
  • Support for multiple SIP servers for redundancy
  • Ethernet I/F 10/100 Mbps
    Protocol SIP RFC 3261 Compatible
    Notification Software Singlewire InformaCast v4.0 and above
    Power Input PoE 802.3af/802.3at compliant or 24VDC @ 1A Auxiliary Power Supply (not included)
    Audio Output  802.3af: 103 dB @ 1 meter
    802.3at: 105 dB @ 1 meter
    On-Board Relay 1A @ 30 VDC
    Payload Types G.711 a-law, G.711 µ-law, G.722 and G.729
    Network Security TLS/SSL 1.2 and SRTP
    Operating Range Temperature: -40 degrees C to 55 degrees C (-40 degrees F to 131 degrees F)
    Humidity: 5-95%, non-condensing
    Storage Temperature -40 degrees C to 70 degrees C (-40 degrees F to 158 degrees F)
    Storage Altitude Up to 15,000 ft. (4573 m)
    Dimensions*
    9 in. [228.6 mm] Grill Diameter
    7.25 in. [184.2 mm] Can Diameter
    2.4 in. [60.96 mm] Can Depth
    Weight 3.0 lbs. [1.36 kg]
    Boxed Weight 4.0 lbs. [1.81 kg]
    Compliance CE; EMC Directive - Class A EN 55032 & EN 55024, LV Safety Directive- EN 60950-1, RoHS Compliant, FCC; Part 15 Class A, Industry Canada; ICES-3 Class A, IEEE 802.3 Compliant
    Warranty 2 Year Limited
    Part Number/Color 011400/RAL 9003 (Signal White)

    *Dimensions are measured from the perspective of the product being upright with the front of the product facing you.

    What is multicast?

    IP multicast is a technique for one-to-many communication over a local IP network. IGMP multicast is sent via UDP packets from a multicast server to a multicast receiver. This stream scales to a larger receiver population by not requiring prior knowledge of who or how many receivers there are. Multicast uses network infrastructure efficiently by requiring the source to send a packet only once, even if it needs to be delivered to many receivers. The network replicates the packet in order to reach multiple receivers only when necessary.

    Multicast is a great alternative to SIP registration as it does not require that the recipient of the stream to register as an extension on an IP-PBX server.

    CyberData products support both regular IGMP multicast as well as proprietary Polycom Group Paging.

    Questions regarding Singlewire-enabled devices?

    Typical Installation

    Running the Speaker with a Remote Call Button

    AC Power

    LED Strobe

    Auxilliary Analog Speaker

    Amplifier

    Ceiling Mounting

    Ceiling Tile Mounting with Reinforcement Mount

    Speaker to Strobe Connections

    Description

    The CyberData InformaCast Enabled Talk-Back Speaker enables two-way conversations, either through downloading SIP credentials from Singlewire InformaCast v12.1, or through an IP-PBX. Enhanced full and half duplex audio settings can be configured to meet the specific needs of your installation.

    The InformaCast Enabled Talk-Back Speaker easily connects into local area networks with a single CAT5/6 cable from your PoE switch. Its small footprint allows the speaker to be installed almost anywhere with multiple mounting options available.

    Features

  • Full duplex audio with configurable echo cancelling
  • Adaptive half duplex audio with configurable VOX (Voice Operated Switch) settings
  • Half duplex push to talk audio from the phone side using the phone's keypad or from the speaker side using CyberData's Remote Call Button
  • Audio health check to verify hardware performance that can be scheduled or launched manually
  • Supports a Monitor Mode
  •  

  • Dual registration for InformaCast and SIP
  • Supports Singlewire InformaCast High Quality Audio
  • Simultaneous InformaCast, SIP and multicast
  • Support for Cisco SRST resiliency
  •  

  • Supports user-uploadable ring and alert tones, and up to ten stored messages
  • Support for security code to prevent unwanted SIP calls
  • Can receive pages directly from Poly phones as well as other devices that can send standard multicast
  • Loud/Night Ringer function - second SIP extension
  • Support for 10 multicast paging groups with prioritization
  •  

  • Can drive one external analog speaker for greater coverage
  • DTMF-controlled relay
  • Line-out connection
  • Network and manual speaker volume control
  •  

  • TLS 1.2 and SRTP enhanced security for IP Endpoints in a local or cloud-based environment
  • Autoprovisioning via HTTP, HTTPS, or TFTP
  • HTTPS or HTTP web based configuration. HTTPS is enabled by default
  • 802.11q VLAN tagging
  • Configurable event generation for device health and status monitoring
  • Web-based upgradeable firmware
  • Support for multiple SIP servers for redundancy
  • Specs

    Ethernet I/F 10/100 Mbps
    Protocol SIP RFC 3261 Compatible
    Notification Software Singlewire InformaCast v4.0 and above
    Power Input PoE 802.3af/802.3at compliant or 24VDC @ 1A Auxiliary Power Supply (not included)
    Audio Output  802.3af: 103 dB @ 1 meter
    802.3at: 105 dB @ 1 meter
    On-Board Relay 1A @ 30 VDC
    Payload Types G.711 a-law, G.711 µ-law, G.722 and G.729
    Network Security TLS/SSL 1.2 and SRTP
    Operating Range Temperature: -40 degrees C to 55 degrees C (-40 degrees F to 131 degrees F)
    Humidity: 5-95%, non-condensing
    Storage Temperature -40 degrees C to 70 degrees C (-40 degrees F to 158 degrees F)
    Storage Altitude Up to 15,000 ft. (4573 m)
    Dimensions*
    9 in. [228.6 mm] Grill Diameter
    7.25 in. [184.2 mm] Can Diameter
    2.4 in. [60.96 mm] Can Depth
    Weight 3.0 lbs. [1.36 kg]
    Boxed Weight 4.0 lbs. [1.81 kg]
    Compliance CE; EMC Directive - Class A EN 55032 & EN 55024, LV Safety Directive- EN 60950-1, RoHS Compliant, FCC; Part 15 Class A, Industry Canada; ICES-3 Class A, IEEE 802.3 Compliant
    Warranty 2 Year Limited
    Part Number/Color 011400/RAL 9003 (Signal White)

    *Dimensions are measured from the perspective of the product being upright with the front of the product facing you.

    FAQs

    What is multicast?

    IP multicast is a technique for one-to-many communication over a local IP network. IGMP multicast is sent via UDP packets from a multicast server to a multicast receiver. This stream scales to a larger receiver population by not requiring prior knowledge of who or how many receivers there are. Multicast uses network infrastructure efficiently by requiring the source to send a packet only once, even if it needs to be delivered to many receivers. The network replicates the packet in order to reach multiple receivers only when necessary.

    Multicast is a great alternative to SIP registration as it does not require that the recipient of the stream to register as an extension on an IP-PBX server.

    CyberData products support both regular IGMP multicast as well as proprietary Polycom Group Paging.

    Questions regarding Singlewire-enabled devices?

    Installation


    Typical Installation

    Running the Speaker with a Remote Call Button

    AC Power

    LED Strobe

    Auxilliary Analog Speaker

    Amplifier

    Ceiling Mounting

    Ceiling Tile Mounting with Reinforcement Mount

    Speaker to Strobe Connections

    Downloads