011085 Singlewire InformaCast Paging Amplifier (Replacement Product is 011403)

Part Number: 011085

MSRP: $0.00

The CyberData VoIP V2 Singlewire-enabled Paging Amplifier is for use with Singlewire's paging and emergency notification software InformaCast® or InformaCast® CK. This PoE-powered device hooks up easily to new and existing Singlewire installations. With up to 25 watts of driving power (802.3at), the Amplifier provides direct drive of a standard Horn speaker and supports a line out connector for connection to an external amplifier. The V2 Paging Amplifier is the most powerful PoE-powered paging device on the market today and perfect for any environment requiring high-powered mass notification.
  • InformaCast® compliant
  • InformaCast® CK compliant
  • Supports SingleWire/Informacast Server Resilience
  • Dual speed 10/100 Mbps
  • Web-base firmware upgradeable
  • Power-over-ethernet enabled
  • IGMP
  • Autoprovisioning
  • Line-out connector
Protocol InformaCast® v4.0 and later
Ethernet I/F 10/100 Mbps
Power Input PoE 802.3at or 802.3af
Operating Temperature -10 degrees C to 50 degrees C (14 degrees F to 122 degrees F)
Payload Types G711
Output Level, 802.3af: Up to 8 watts
Output Level, 802.3at: Up to 25 watts
RCA Output Signal Amplitudes 2.0 VPP maximum
RCA Output Level +2dBm nominal
RCA Total Harmonic Distortion 0.5% maximum
RCA Output Impedance 10k ohm
Regulatory Compliance FCC Class A
Dimensions 9.45" x 1.26" x 3.13" (H x W x D)
Boxed Weight 2 lbs.
Warranty 2 Year Limited
Part Number 011085
What is the coverage of this device?

When attached to a standard 802.3af port on a PoE switch, you can only attach one horn (8 ohm 30-40 watt rated) with no more than 25 ft. of 16 gauge speaker wire and will cover about 5,000+ sqft depending on ambient background noise.

When attached to a standard 802.3at (high power mode) port on a PoE switch, you can attach two horns (8 ohm 30-40 watt rated) with no more than 13 ft. of 16 gauge speaker wire to each horn and will cover about 10,000+ sqft depending on ambient background noise.

For outdoor paging please refer to Outdoor Notification Testing Example Using the CyberData Paging Amplifier


Typical Line Out

Typical Installation: PoE 802.3at

Typical Installation: High Power PoE Injector

Wiring Connections

Connecting to LED Strobe

Alarm Sensing

Amplified Outputs High Power Mode

Amplified Outputs Low Power Mode

Description

The CyberData VoIP V2 Singlewire-enabled Paging Amplifier is for use with Singlewire's paging and emergency notification software InformaCast® or InformaCast® CK. This PoE-powered device hooks up easily to new and existing Singlewire installations. With up to 25 watts of driving power (802.3at), the Amplifier provides direct drive of a standard Horn speaker and supports a line out connector for connection to an external amplifier. The V2 Paging Amplifier is the most powerful PoE-powered paging device on the market today and perfect for any environment requiring high-powered mass notification.

Features

  • InformaCast® compliant
  • InformaCast® CK compliant
  • Supports SingleWire/Informacast Server Resilience
  • Dual speed 10/100 Mbps
  • Web-base firmware upgradeable
  • Power-over-ethernet enabled
  • IGMP
  • Autoprovisioning
  • Line-out connector

Specs

Protocol InformaCast® v4.0 and later
Ethernet I/F 10/100 Mbps
Power Input PoE 802.3at or 802.3af
Operating Temperature -10 degrees C to 50 degrees C (14 degrees F to 122 degrees F)
Payload Types G711
Output Level, 802.3af: Up to 8 watts
Output Level, 802.3at: Up to 25 watts
RCA Output Signal Amplitudes 2.0 VPP maximum
RCA Output Level +2dBm nominal
RCA Total Harmonic Distortion 0.5% maximum
RCA Output Impedance 10k ohm
Regulatory Compliance FCC Class A
Dimensions 9.45" x 1.26" x 3.13" (H x W x D)
Boxed Weight 2 lbs.
Warranty 2 Year Limited
Part Number 011085

FAQs

What is the coverage of this device?

When attached to a standard 802.3af port on a PoE switch, you can only attach one horn (8 ohm 30-40 watt rated) with no more than 25 ft. of 16 gauge speaker wire and will cover about 5,000+ sqft depending on ambient background noise.

When attached to a standard 802.3at (high power mode) port on a PoE switch, you can attach two horns (8 ohm 30-40 watt rated) with no more than 13 ft. of 16 gauge speaker wire to each horn and will cover about 10,000+ sqft depending on ambient background noise.

For outdoor paging please refer to Outdoor Notification Testing Example Using the CyberData Paging Amplifier

Installation


Typical Line Out

Typical Installation: PoE 802.3at

Typical Installation: High Power PoE Injector

Wiring Connections

Connecting to LED Strobe

Alarm Sensing

Amplified Outputs High Power Mode

Amplified Outputs Low Power Mode

Downloads